Manufacturers of a variety of instrumentation for the detection of toxic, combustible and general gases along with water quality instrumentation for monitoring dissolved oxygen, dissolved ozone,dissolved ammonia,residual chlorine, chlorine dioxide, sulfite, sulfate, fluoride, pH/ORP, conductivity, turbidity and particle counters.
The Q46D dissolved oxygen system with Q-Blast sensor cleaner provides reliable measurement using either optical or membrane sensors. It is ideal for aeration control systems, ...
Entech EchoSmart sludge blanket monitors take the guesswork out of blanket measurements in clarifiers, thickeners and anywhere else an underwater interface measurement is needed...
The C16 PortaSens II portable leak detector is used to check for gas leaks in storage areas, around process equipment and piping, and in confined spaces prior to entry. It contains...
MetriNet – derived from “network metrics” – is a low-power, modular system for monitoring water quality at remote locations. The heart of the system is ATI’s new series of smart...
The Auto-Chem sulfite system employs a gas-phase method that continuously monitors sulfite without contact between the sensor and the water sample. This air-stripping method in...
Monitor your Residual Chlorine without the need of buffers or reagents with ATI’s direct measuring membraned, polarographic sensor. This means, no more costly reagents to purchase...
The Series Q46H Monitoring System by Analytical Technology Inc. simplifies documentation of disinfectant residuals in water distribution systems. Providing continuous measurements...
ATI’s new Q46H chlorine monitor is an upgraded version of the proven Q45H system for continuous monitoring of free or combined chlorine. The system uses a polarographic membraned...
The Q45N dissolved ammonia monitor uses reaction chemistry that converts ammonia in solution to a stable monochloramine compound equivalent in concentration to the original ammonia...
The Auto-Chem sulfite system employs a unique gas-phase method that continuously monitors sulfite without contact between the sensor and the water sample. This air-stripping method...
About the author: Analytical Technology Inc. can be reached at www.analyticaltechnology.com or 800.959.0299. Analytical Technology Inc.undefinedMetriNet is a unified system for...
About the author: To contact Analytical Technology, Inc. go to www.analyticaltechnology.com or call 800.959.0299.Analytical Technology, Inc.undefinedThe Punta Gorda (Fla.) Water...
About the author: Analytical Technology Inc. | 800.959.0299 | www.analyticaltechnology.comBritvic Soft Drinks Ltd. is one of the U.K.’s largest suppliers of branded still soft...
Britvic Soft Drinks Ltd. is one of the U.K.’s largest suppliers of branded still soft drinks and branded carbonates. Based in Chelmsford, Essex, U.K., the company operates seven...
Britvic Soft Drinks Ltd. is one of the U.K.’s largest suppliers of branded still soft drinks and branded carbonates. Based in Chelmsford, Essex, U.K., the company operates seven...
The ATI Model F12 is an intrinsically safe gas transmitter designed for the detection of a variety of toxic gases in hazardous locations or general purpose applications. This ...
ATI's new Q46H chlorine monitor is the upgraded version of the Q45H system for continuous monitoring of free or combined chlorine. This system uses a polarographic membraned sensor...
The Q46H chlorine monitor is the upgraded version of the Q45H system for continuous monitoring of free or combined chlorine. This system uses a polarographic-membraned sensor ...
The Q46H residual chlorine monitor uses a polarographic membraned sensor to measure chlorine directly, without chemical reagents. Automatic pH compensation may be added for free...
The peracetic acid (PAA) sensor provides sensitivity to 0.05 ppm while measuring selectively without interference from hydrogen peroxide, a component of PAA solutions. Sensors...
The Model Q46H/79S total chlorine monitor uses standard iodometric chemistry with a sensing technique for measuring the released iodine. The system takes the reacted sample containing...
The Q45D dissolved oxygen monitor is designed to provide reliable oxygen measurement and reduce maintenance costs. Monitoring dissolved oxygen in wastewater aeration systems, ...
