FCI-Fluid Components Intl. manufactures air/gas flowmeters, liquid/gas flow switches and flow conditioners. In both municipal and industrial WWT plants, FCI is the leading supplier in aeration and digester gas flow measurement applications, so you can install with total confidence and assurance that you are getting the right product, backed by FCI’s worldwide service and support.
The ST100 Series thermal mass air/gas flowmeter from Fluid Components International (FCI) has received ATEX and IECEx approvals, assuring FCI’s customers that the ST100 flowmeter...
Biogas is a mix of methane, carbon dioxide, water and hydrogen sulfide. It is wet, corrosive and combustible. FCI’s SIL-rated ST51A Biogas Flowmeter provides accurate, repeatable...
The dual-alarm FLT93 flow switch monitors the flow and temperature of liquids, gases and slurries. It is suitable for pump wet/dry detection. Alarm 1 detects a low flow between...
The ST100 Series thermal flowmeter provides precision mass flow measurement. With its no moving parts, simple insertion-style design, and comprehensive, global HazEx approvals...
The FCI FLT93S insertion-type FlexSwitch for flow and temperature monitoring is SIL 2 rated. It was designed for rugged environments, including wastewater treatment plants. FCI...
Pump flow assurance is easy with FCI model FLT93 flow switches. For use with virtually any fluid, FLT93 includes standard features such as dual relay outputs, temperature compensation...
The LS2000 level switch provides an economical solution for alarm and limit trip switch applications in process and plant installations. These thermal dispersion technology-based...
The Model ST51A flowmeter is an insertion-style instrument designed for use in pipe diameters larger than 2 in. (51 mm); it is optimized for flow measurement of air, compressed...
The ST100 Series flowmeter features a plug-in card replacement that can be changed out in the field to adapt to changing communication needs. A graphical, multivariable, backlit...
The FlexSwitch FLT pump protection flow switch improves process control by adding an extra margin of safety. The switch keeps pumps running longer and more reliably with less ...
Take the tour and get an insider’s look at the Calibration Lab at Fluid Components International (FCI). Learn why calibration flow meters in the actual fluid media improves their...
Fluid Components International (FCI) solves flow and level measurement applications for industrial process and plant applications using patented thermal dispersion technology....
An FCI video explains how the thin, flat Vortab Insertion Panel (VIP) flow conditioner improves flowmeter accuracy while reducing meter straight-run requirements.
One of the biggest expenses in wastewater treatment operations is the cost of energy to run the blowers and compressors that produce air for the aeration basins. The figures most...
Process and plant engineers at municipal wastewater treatment facilities need to measure, monitor and dispose of methane and other digester gases that occur naturally in their...
One of the biggest expenses in wastewater treatment operations is the cost of energy to run the blowers and compressors that produce air for the aeration basins. The figures most...
Activated sludge systems have been cornerstones of wastewater treatment for more than 100 years. This biological process uses suspended-growth microorganisms to break down and...
Driven by tight budgets and competing needs for limited CAPEX funds, wastewater treatment plants are increasingly looking to reduce their operating expenses. Many are now referring...
Many of today’s large urban water treatment plants rely upon sophisticated chlorination processes in order to provide clean, sanitary water to millions of consumers in the US ...
Wastewater treatment plants use numerous pumps throughout their processes. Losing a pump to dry running conditions is not only expensive, but risks environmental violations. Learn...
In today’s complex and frequently rugged process plant environments, liquid pumps are often overworked and underprotected from adverse operating conditions. Many pumps run nearly...
Many municipal water treatment plants utilize ozone treatment systems to produce clean water for residential and industrial users. While all the various types of water treatment...
Flocculants are used in both the treatment of municipal sewage and industrial wastewater. There are many different types of flocculant chemicals and wastewater treatment systems...
The new Water & Wastewater Treatment Guide from Fluid Components International (FCI) explains how to optimize flow measurement in 20 different municipal applications to enhance...
Register Here for On-Demand WebinarFact: Piping constraints can lead to inaccuracies in your gas flow measurements. Inaccuracies lead to inefficient processes. Inefficient processes...
With no moving parts, simple installation and rugged packaging, Fluid Components Intl. offers flowmeter solutions with low maintenance, low installed cost and long service life...
Vortab flow conditioners reduce the required straight pipe diameters to only a very few diameters for effective compact meter installation and accurate flow measurement. The design...
Wastewater treatment engineers who cannot find room for the recommended straight pipe run needed by electromagnetic flowmeters in sewage lift stations will find that the Vortab...
FCI’s compact thermal flowmeter line has been expanded and improved with an advanced electronics design that features the addition of HART version 7 digital bus communication ...
With its thermal mass flow sensor design, the ST98 flowmeter is suitable for waste-to-energy electric power cogeneration in wastewater treatment plants. It provides direct mass...
The Model ST100L is an inline, spool-piece gas mass flowmeter suitable for chlorine gas service, and it is available with an optional built-in Vortab Flow Conditioner. This inline...
The new FLT93 Series FlexSwitch brochure provides a switch solution with complete product and application information. The FLT93 Series FlexSwitch is a heavy-duty thermal dispersion...
A fast-growing city in the arid desert regions of the Western U.S. recently addressed the need to expand its municipal service for new residents and subdivisions. In recent years...
The dual-function FS10i flow switch/monitor delivers two functions in a single instrument, providing process and plant engineers a flow monitor at the price of a flow switch. ...
