Sewage Treatment Plant Project Captures Phosphorus

July 29, 2020

A project at the Fleming Island Sewage Treatment Plant is catching 96% of the phosphorus that is usually released into water 

The Fleming Island Wastewater Treatment Facility is using plants as part of a demonstration project to remove phosphorus from wastewater that eventually heads toward the Clay County lake.

For the past 36 years, give or take a few, algae has been heavily prevalent at the lake, covering the water in blooms which sometimes release toxins and pose health hazards, reported Jacksonville News. Last month, when the delayed demonstration project was finally completed, levels of phosphorus being released through the wastewater fell by 96%.

According to Mark Merkelbach, a wetland scientist who is a partner in Sustainable Water Investment Group (SWIG), a company the St. Johns River Water Management District contracted to put the filtering idea, they are actually exceeding a phosphorus removal goal.

The company wants to use its success in Fleming Island to get utilities and government agencies to look at using its system to clean water all around Florida.

“It’s much more efficient than other systems that are out there,” said Jim McCarthy, president of the North Florida Land Trust, a Jacksonville nonprofit that partnered with SWIG to get the company’s system into use in Florida. “It’s a really highly successful project. We’re ready to take it to other places.”

According to state employees who checked Doctors Lake for algae last week, no blooms were found. Water from the sewage treatment plant makes up about 15% of the water flowing into Doctors Lake’s watershed, said Dean Dobberfuhl, water resources bureau chief for the water management district.

There are other sources of phosphorus nearby as well. To mitigate the issue, the management district signed a $1.5 million deal with the Clay County Utility Authority in January to subsidize work near the lake connecting septic systems to sewer lines.

Early this year, a new step was added to the plant’s treatment process, which involved setting up a pipeline to carry already-cleaned water from the treatment plant to a field right beside it covering a little more than an acre, reported Jacksonville News. Crews installed a layer of rocks and a drain pipe with holes in the top where water could flow in, then covered them with a layer of material that is designed to absorb phosphorus.

SWIG’s field filters about two million gallons of wastewater a day. The system is designed to absorb 35,000 pounds of phosphorus over six years, reported Jacksonville News. After six years, the field will probably capture about 88% of the phosphorus in wastewater.

Read related content about wastewater & phosphorus: 

About the Author

Cristina Tuser

Sponsored Recommendations

2024 Manufacturing Trends Unpacking AI, Workforce, and Cybersecurity

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Blower Package Integration

March 20, 2024
See how an integrated blower package can save you time, money, and energy, in a wastewater treatment system. With package integration, you have a completely integrated blower ...