Clean Water Systems Supplies Chlorine Disinfection for Wyoming Gas Plant

Feb. 27, 2015
The on-demand chlorination system helps the plant comply with Washington Department of Environmental Quality requirements

The Willliams Cos. Inc. owns and operates the Opal Gas Processing Plant in Lincoln County, Wyo. The plant processes natural gas gathered from wells in the area in preparation for interstate natural gas pipeline transport. It also produces natural gas liquids (NGL) from the natural gas.

A new administrative building was recently built and is supported by a storage tank with trucked-in treated water. Water demand at the site is not large and the water is often stored for long periods. During this time, the chlorine residual would drop below the requirements of the Wyoming Department of Environmental Quality (DEQ). The state agency asked the company to install an on-demand chlorination system in to order to make sure the water in the storage tank was kept sanitized and a steady chlorine residual maintained.

Clean Water Systems was chosen to design and supply a package skid recirculation and chlorine injection. Clean Water Systems specializes in turnkey package disinfection systems for ground and surface waters. Common packages include automatic chlorination, ozone, and UV sterilizer systems.

To satisfy the Wyoming DEQ requirements, an automatic chlorination system with recirculation pump was designed. The recirculation system is turned on and off by a repeat cycle timer. The skid has a 1-1/2 hp stainless steel recirculation pump pulls water from the storage tank and pumps it through a GF 3-8900 chlorine analyzer. Free chlorine is regularly monitored automatically, and if the free-chlorine residual drops below 0.25 ppm, the metering pump turns on and injects sodium hypochlorite solution, and boosts the chlorine residual back up to the desired level.

A paddle-wheel flow-sensor senses flow and activates the metering pump to turn on and inject chlorine when the water is flowing. The system features a double-wall tank for extra protection and is all mounted on a heavy powdercoat steel frame and skid.

A technician from Clean Water Systems, Demian Ashley was sent to the site to start up the system and review the operations with the on-site staff from Williams Co., and the installers Envision Mechanical. “Their technical staff and the staff from Envision Mechanical did a great job of installing not only the chlorination skid, but also the shed where the equipment was located. It featured a chlorine gas detector and was completely winterized. Looked very good, and the system is operating perfectly,” Ashley said.

Source: Clean Water Systems

Sponsored Recommendations

Get Utility Project Solutions

June 13, 2024
Lightweight, durable fiberglass conduit provides engineering benefits, performance and drives savings for successful utility project outcomes.

Energy Efficient System Design for WWTPs

May 24, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.

Meeting the Demands of Wastewater Treatment Plants

May 24, 2024
KAESER understands the important requirements wastewater treatment plant designers and operators consider when evaluating and selecting blowers and compressed air equipment. In...

Modernize OT Cybersecurity to Mitigate Risk

April 25, 2024
Rockwell Automation supports industry-leading Consumer Packaged Goods company, Church & Dwight, along their industrial cybersecurity journey.