Synagro to Provide Emergency Support to NJ Wastewater Treatment Facility

Nov. 13, 2012
Company will provide 10 centrifuges to the facility that serves more than 3.5 million residents

Synagro Technologies Inc. announced that it has agreed to provide critical support to bring New Jersey’s largest wastewater treatment facility back into operation following damage sustained from Hurricane Sandy.

The company is providing 10 centrifuges and additional equipment to the Passaic Valley Sewage Commission facility in Newark, whose operations were curtailed after flooding damaged vital equipment. The facility treats biosolids extracted from 330 million gal of wastewater each day routed from Newark, Essex, Passaic, Union, Hudson and Bergen counties, serving more than 3.5 million New Jersey residents. Approximately 35 Synagro employees will work on the recovery project.

The emergency support will allow the facility to continue treating wastewater while it takes steps to regain full operational capacity. Under the terms of the agreement, Synagro will provide support on an as needed basis until the facility becomes fully operational.

The company is working alongside the Army Corps of Eng., the U.S. Environmental Protection Agency and state and local officials. As part of this process, the company re-routed equipment and personnel previously committed to non-emergency services across the country and in Canada.

“In an emergency situation, it is imperative these facilities be brought back into operation as quickly and effectively as possible, both for health and safety reasons,” said Eric Zimmer, the company’s president and CEO. “I laud the efforts of our entire team and want to thank all of the federal, state, and local authorities who are helping to make our job that much easier.”

Separately, the company also has agreed to provide four belt presses to support a hurricane-damaged wastewater treatment facility in Nassau County, N.Y.

Source: Synagro

Sponsored Recommendations

Benefits of Working with Prefabricated Electrical Conduit

Aug. 14, 2024
Learn how prefabrication of electrical conduit can mitigate risk, increase safety and consistency, and save money.

Chemical Plant Case Study

Aug. 14, 2024
Chemical Plant Gets a Fiberglass Conduit Upgrade

Electrical Conduit Cost Savings: A Must-Have Guide for Engineers & Contractors

Aug. 14, 2024
To help identify cost savings that don’t cut corners on quality, Champion Fiberglass developed a free resource for engineers and contractors.

Energy Efficient System Design for WWTPs

May 24, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.