In A Pinch

March 5, 2004
Infrastructure includes ability to divert flow and store stormwater

About the author: David Lavender is marketing manager for Red Valve Co. He can be reached at [email protected].

Historically, the processing of wastewater was focused on simply collecting sewage and pumping it to the local wastewater treatment plant for processing. Under normal, dry weather conditions, sewage flow would flow directly into the wastewater treatment plant. There were no provisions for handling stormwater--it was allowed to discharge freely into waterways.

Eventually, the U.S. Environmental Protection Agency (EPA) restricted the free flow of stormwater and required the first 10% of rainwater be captured and treated. This resulted in the installation of larger pipelines where sewage was combined with stormwater and piped to the wastewater treatment plant for processing.

Combined sewer systems were sized to handle all of the normal sewage flow through the line and the first 10% of rainfall. At the time, experts believed that if the treatment plant could handle the normal sewage load and the first 10% of rainfall, there would be little or no impact on the environment. The rationale was if all of the excess flow was relatively clean or very diluted, it could simply overflow into the receiving waterway.

Since then, engineers have learned that overflow events cause beach closings, river contamination, damage to the environment, sickness and in severe cases, death.

Today, there is legislation to eliminate combined sewer overflows. Heavy fines are levied by the EPA against communities that violate this law. The EPA has been reasonable with enforcement because the costs associated with eliminating combined sewer overflows are great--not to mention that it will take time to expand the infrastructure.

However, as municipalities and utilities have learned, eliminating overflow events is a must.

Ways and means

There are a number of ways to eliminate combined sewer overflow events. These include building a new wastewater treatment plant, expanding an existing plant, building a deep tunnel to capture stormwater, building flow equalization or retention basins to handle peak flows, better utilizing the storage capacity of the existing collection system.

A large Midwest city (per a request to WWD, the city wished to remain anonymous) reviewed these options and decided to use the capacity of its collection and interceptor system for stormwater storage and to regulate or divert flow to minimize or eliminate overflow events.

Calling on the design skills of the Triad Engineering Corp., a control strategy was identified that would minimize combined sewer overflow volume and frequency through the optimization of the collection and treatment system.

To accomplish these goals, Triad designed a system that used three Type A Megaflex pinch valves manufactured by the Red Valve Co., to regulate and/or divert flow to portions of the pipeline network that have storage capacity. The design called for two 72-in. and one 66-in. Megaflex pinch valve.

Monitoring devices located throughout the network of collection pipelines send flow data via telemetry to a central control station. In turn, a control signal is sent to one of the Megaflex valves to partially close the valve in order to regulate or divert the flow into portions of the collection system with greater storage capacity.

The cost-effective Type A Megaflex was selected for the city’s system because the full line size valves are like a straight piece of pipe when open and the partial closing capability of these valves provided the ability to isolate or control the flow.  

About the Author

David Lavender

Sponsored Recommendations

Meeting the Demands of Wastewater Treatment Plants

May 24, 2024
KAESER understands the important requirements wastewater treatment plant designers and operators consider when evaluating and selecting blowers and compressed air equipment. In...

Modernize OT Cybersecurity to Mitigate Risk

April 25, 2024
Rockwell Automation supports industry-leading Consumer Packaged Goods company, Church & Dwight, along their industrial cybersecurity journey.

2024 Manufacturing Trends Unpacking AI, Workforce, and Cybersecurity

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...