Pumps Offer Low Life-Cycle Costs

June 8, 2016
Products are designed for easy installation & maintenance

Seepex’s Smart Conveying Technology (SCT) is an award-winning progressive cavity (PC) pump design that offers radically reduced maintenance times and low life-cycle costs. The design involves a stator comprised of two elastomer halves covered by four metal segments that are easily removed to access internals and service the pump. The segments’ bolts can be tightened multiple times to boost flow, compensating for elastomer wear and achieving required pressure, leading to high energy efficiency and extended part use.

The SCT PC pump’s rotor is specially engineered and manufactured in two pieces: the rotor head and the rotor geometry. This allows the rotor geometry—the portion of the part that wears—to be replaced quickly without disrupting the universal joint connecting to the power train, saving maintenance time and cost. The pumps also do not need to be removed from suction or discharge piping for service, and one individual can work on them without the need for special tools.

SCT PC pumps handle conveying capacities up to 500 gpm and pressures up to 120 psi, and they are used in a wide variety of applications in nearly every industry. They are an easy, cost-effective, drop-in solution for pump replacement.

Contact Us
Seepex Inc.
Enon OH
937.864.7150
www.seepex.com

Sponsored Recommendations

Get Utility Project Solutions

June 13, 2024
Lightweight, durable fiberglass conduit provides engineering benefits, performance and drives savings for successful utility project outcomes.

Meeting the Demands of Wastewater Treatment Plants

May 24, 2024
KAESER understands the important requirements wastewater treatment plant designers and operators consider when evaluating and selecting blowers and compressed air equipment. In...

Modernize OT Cybersecurity to Mitigate Risk

April 25, 2024
Rockwell Automation supports industry-leading Consumer Packaged Goods company, Church & Dwight, along their industrial cybersecurity journey.

2024 Manufacturing Trends Unpacking AI, Workforce, and Cybersecurity

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...
Seepex_logo_smaller
Directory

Seepex Inc.

April 26, 2018