In-Tank Aeration Provides Targeted THM Removal at Half the Energy Cost

Nov. 21, 2014
Solution provider partners with municipalities to diagnose THM formation & perform a system-wide treatment needs analysis

With the Stage 2 Disinfectants and Disinfection Byproduct Rule in place, operators are increasingly adopting in-tank aeration to lower trihalomethanes (THMs) in the distribution system. Operators have many technologies to choose from, but each aeration technology comes with its own set of challenges. When it comes to selecting the right THM removal system for a tank, custom design is key. Optimizing system design is critical for predicting and achieving THM removal rates, minimizing energy requirements and calculating long-term operating costs.

The PAX Trihalomethane Removal System (TRS) is a custom-designed, energy-optimized system of mixers, aerators and ventilators that turn ordinary water storage tanks into water treatment systems. Unlike other treatment technologies for lowering THM levels (involving large-scale changes to water treatment plants), TRS can be implemented quickly and cost-effectively, targeting locations in the water  distribution system where THM levels are the highest.

PAX Water Technologies partners directly with municipalities to diagnose THM formation and perform a system-wide treatment needs analysis. This data, together with proprietary design and performance modeling software, enables PAX Water Technologies to create in-tank aeration systems that achieve a guaranteed THM removal goal at 50% the energy cost of other THM removal technologies.

Contact Us
PAX Water Technologies
Richmond, CA 94804
866.729.6493
www.paxwater.com
[email protected]

Sponsored Recommendations

Meeting the Demands of Wastewater Treatment Plants

May 24, 2024
KAESER understands the important requirements wastewater treatment plant designers and operators consider when evaluating and selecting blowers and compressed air equipment. In...

Modernize OT Cybersecurity to Mitigate Risk

April 25, 2024
Rockwell Automation supports industry-leading Consumer Packaged Goods company, Church & Dwight, along their industrial cybersecurity journey.

2024 Manufacturing Trends Unpacking AI, Workforce, and Cybersecurity

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...