Studies Reveal Why Drinking Water Wells Vulnerable to Contamination

Feb. 15, 2010
USGS tracks movement of contaminants in groundwater and public supply wells in four aquifers

All wells are not equally vulnerable to contamination because of differences in three factors: the general chemistry of the aquifer, groundwater age and direct paths within aquifer systems that allow water and contaminants to reach a well.

More than 100 million people in the U.S. receive their drinking water from public groundwater systems, which can be vulnerable to naturally occurring contaminants such as radon, uranium, arsenic and man-made compounds, including fertilizers, septic tank leachate, solvents and gasoline hydrocarbons.

The U.S. Geological Service (USGS) tracked the movement of contaminants in groundwater and in public supply wells in four aquifers in California, Connecticut, Nebraska and Florida. The importance of each factor differs among the various aquifer settings, depending upon natural geology and local aquifer conditions, as well as human activities related to land use and well construction and operation. Findings in the four different aquifer systems can be applied to similar aquifer settings and wells throughout the nation.

“Our findings can help public supply well managers protect drinking water sources by prioritizing their monitoring programs and improving decisions related to land use planning, well modifications or changes in pumping scenarios that might help to reduce movement of contaminants to wells,” said Sandra Eberts, USGS groundwater study team leader.

Highlights on the four studies:

In the Central Valley aquifer system near Modesto, Calif., the USGS found that agricultural and urban development have enabled uranium to move from sediments to water in the upper part of the aquifer. This water can drain down the well when it is not pumping and enter the lower aquifer. When pumping resumes, contaminant concentrations can be temporarily elevated in water pumped from the well. As a result of USGS findings, public supply well managers have changed their pumping schedule, which has reduced the amount of contaminated water pumped from the well.

In the glacial aquifer system in Woodbury, Conn., the USGS found that the young age of the water throughout the aquifer makes it vulnerable to contamination from man-made compounds. The USGS also found that dry wells used in Woodbury to capture storm water runoff reroute the potentially contaminated water directly into the aquifer used as a drinking water source. This direct transfer prevents soil and unsaturated sediments near the land surface from filtering out some of the contaminants.

In the High Plains aquifer near York, Neb., the USGS found some contaminants in a public supply well that seems protected by overlying clay. Nearby irrigation wells have allowed water containing nitrate and volatile organic compounds to leak down from an overlying shallow aquifer into the aquifer that serves as the drinking water source for the public supply well.

In the Floridan aquifer system near Tampa, Fla., the USGS found that a large percentage of young water and contaminants from a shallow sand aquifer travels quickly along natural conduits until it reaches a supply well in a lower rock aquifer that serves as a drinking water source. Because of these natural conduits, the supply well is vulnerable to the man-made contaminants in the upper aquifer, and the mixing of waters from the two aquifers has caused arsenic concentrations to increase in water reaching the supply well.

Source: USGS

Sponsored Recommendations

Blower Package Integration

March 20, 2024
See how an integrated blower package can save you time, money, and energy, in a wastewater treatment system. With package integration, you have a completely integrated blower ...

Strut Comparison Chart

March 12, 2024
Conduit support systems are an integral part of construction infrastructure. Compare steel, aluminum and fiberglass strut support systems.

Energy Efficient System Design for WWTPs

Feb. 7, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.

Blower Isentropic Efficiency Explained

Feb. 7, 2024
Learn more about isentropic efficiency and specific performance as they relate to blowers.