Aug 17, 2021

Suspended Solids Sensor with Wiper – Triton TR80

Turbidity – Suspended Solids Sensor with Wiper – Triton TR80

The Triton TR80 is a nephelometric turbidity sensor designed for use in water and wastewater. Turbidity, the cloudiness or haziness of a water sample, is caused by particles suspended in the water, typically clay and silt. Since bacteria and viruses can be attached to these particles, turbidity has become a critical indicator of the overall water quality.

The Triton TR80 uses an optical method for determining the turbidity suspended solids, a light beam is directed into the sample where it is scattered by suspended particles in the water. The amount of scattering depends on the amount of material in the water, the wavelength of light used and the size and composition of the suspended particles. The TR80 uses a long lived near infrared LED light source and the 90° scattered light method in accordance with ISO 7027 / EN 27027 to assure accurate turbidity values under standardized and comparable conditions. The 90° scattered light detection method is the most common sensor design for turbidity. This sensor has the advantage of a high sensitivity for turbidity throughout the measurement range and a simple optical configuration with an automated cleaning wiper.

The TR80 sensor can be configured for turbidity and/or Suspended Solids and connects with the ECD T80 Transmitter or the ECD LQ800 Multi-Channel Controller.

 

Editor's Note: Scranton Gillette Communications and the SGC Water Group are not liable for the accuracy, efficacy and validity of the claims made in this piece. The views expressed in this content do not reflect the position of the editorial teams of Water & Wastes Digest, Water Quality Products and Storm Water Solutions.

Electro-Chemical Devices

Contact

1500 North Kellogg Drive

Anaheim, CA 92807

United States

Phone: 714.695.0051

Phone (Toll - Free): 800.729.1333

Fax: 714.695.0057

http://www.ecdi.com

[email protected]
expand_less