Cargill Plans Wastewater Treatment Project for Beef Processing Plant

Jan. 20, 2011
Treatment system will help plant reduce nitrogen discharges into South Platte River

Cargill announced that it is in the design phase of a project that, when completed, will significantly improve the quality of water discharged into the South Platte River from its beef processing facility in Fort Morgan, Colo. Improvements will address the discharge of total inorganic nitrogen (TIN) and phosphorous, as well as provide improved biogas production, capture and use from organic materials in the facility's wastewater. Work is expected to begin mid-2011 and slated to be complete by the third quarter of 2012, at a cost that is currently estimated to be more than $6 million.

The project is part of an ongoing water quality upgrade initiative by Cargill's Fort Morgan facility, which already has reduced nitrate discharge into waterways by approximately 70% between 2005 and 2009, a figure verified by publicly available U.S. Environmental Protection Agency (EPA) information. Cargill's beef facility is currently compliant with all Colorado Department of Public Health and Environment (CDPHE) water requirements for discharge into the South Platte River.

"While we are proud of the strides we have made in areas such as methane gas capture and use to reduce greenhouse gas emissions, as well as reduce our energy requirements by using methane gas to provide 30% of the facility's total fuel needs, we are always looking for ways to improve our environmental footprint," said Nicole Johnson-Hoffman, assistant vice president and general manager at the Fort Morgan beef processing facility. "As a firm with an agricultural heritage dating back to its 1865 founding as a grain company in rural Iowa, we at Cargill understand the importance and obligation we have as natural resource stewards. Responsibly feeding the increasing world population requires thoughtful management of all resources."

Cargill's Fort Morgan facility has been ISO 14001 certified since 2008. The ISO certification involves identifying and controlling the environmental impact of activities conducted at the facility, continuous environmental improvement and a systematic approach to establishing, implementing and demonstrating achievement of environmental objectives. ISO 14001 is an international standard by which environmental stewardship by industrial organizations is measured.

"Although we are compliant with current discharge requirements, we believe investing in ways to further reduce our environmental footprint is the right thing to do," said Johnson-Hoffman. "This work illustrates how industry can successfully partner with the regulatory community to ensure air, land and water resources are managed properly for future generations. The CDPHE has completed its work to determine how best to implement a total maximum daily load plan for the South Platte River. We have worked closely with CDPHE during our discharge permit renewal process to ensure our planned upgrades allow the state to meet its goals. This type of partnership is critical to the long-term success of our business."

Opened in 1966, the facility's 2,000 employees harvest approximately 1.2 million head of cattle annually and produce beef consumed throughout the United States and in many countries around the world.

Source: ThomasNet News

Sponsored Recommendations

Meeting the Demands of Wastewater Treatment Plants

May 24, 2024
KAESER understands the important requirements wastewater treatment plant designers and operators consider when evaluating and selecting blowers and compressed air equipment. In...

Modernize OT Cybersecurity to Mitigate Risk

April 25, 2024
Rockwell Automation supports industry-leading Consumer Packaged Goods company, Church & Dwight, along their industrial cybersecurity journey.

2024 Manufacturing Trends Unpacking AI, Workforce, and Cybersecurity

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...