Krohne Introduces Tidalflux Flowmeters

Nov. 29, 2010
Product offers accurate measurements in partially filled pipelines

Krohne Inc., a developer, manufacturer and distributor of measurement instrumentation for the process industries, introduces its Tidalflux electromagnetic flowmeter, including IFM 4110 PF and IFM 4210 PF. Used to measure the volumetric flow rate of electrically conductive liquids in partially filled pipelines, the Tidalflux flowmeter offers unsurpassed accuracy for wastewater measurement. This innovative flowmeter is ideal for industrial and municipal water and wastewater treatment applications.

The Tidalflux flowmeter is combined with a capacitive flow level measuring system, built into the wall of the measuring tube, providing accurate flow measurements in partially filled pipelines, with levels between 10% and 100% of the pipe cross-section. The flowmeter’s precise factory calibration ensures a high level of measurement accuracy in partially filled pipelines. Featuring excellent abrasion and chemical resistance, the flowmeter’s steady display of measured values is achieved regardless of rough product surfaces and distorted flow profiles. Calibrated on EN 17 025-accredited calibration rigs, the Tidalflux flowmeter provides a measuring error of less than 1% of the measured value, providing exact measurements with a low time constant even in cases of wave motion and heavy contamination.

The Tidalflux flowmeter offers the benefits of conventional electromagnetic flowmeter technology, including high accuracy, rapid response time, simple installation and commissioning and low maintenance.

Source: Krohne Inc.

Sponsored Recommendations

Get Utility Project Solutions

June 13, 2024
Lightweight, durable fiberglass conduit provides engineering benefits, performance and drives savings for successful utility project outcomes.

Meeting the Demands of Wastewater Treatment Plants

May 24, 2024
KAESER understands the important requirements wastewater treatment plant designers and operators consider when evaluating and selecting blowers and compressed air equipment. In...

Modernize OT Cybersecurity to Mitigate Risk

April 25, 2024
Rockwell Automation supports industry-leading Consumer Packaged Goods company, Church & Dwight, along their industrial cybersecurity journey.

2024 Manufacturing Trends Unpacking AI, Workforce, and Cybersecurity

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...