WRT Signs New Mexico Contract to Remove Radium in Drinking Water

Aug. 20, 2007

Water Remediation Technology, LLC (WRT) is increasing its presence in the West with its first contract in New Mexico to remove radium from drinking water supplies to ensure that it is safe enough for residents to consume.

WRT’s system will treat water from two wells that service about 100 residents in Cañoncito, a residential area approximately 15 miles east of Santa Fe, N.M. Not only will WRT be treating the water under the 10-year contract with the Cañoncito Water Association, but it will also be responsible for the environmentally safe handling and removal of the radium media from the treatment site to a licensed facility, preventing future contamination in the area.

According to the federal Environmental Protection Agency (EPA), radium can be found naturally in soil, water and food at low concentrations. But if it is consumed over a period of time, radium could cause certain health problems such as anemia and cancer.

The current radium concentration in the wells in Cañoncito is 11 pCi/L (Pico curies per liter), more than twice the EPA’s maximum radium presence limit (5 pCi/L). In 2005, the New Mexico Environmental Department ordered the Cañoncito Water Association to improve the quality of drinking water by late 2008 or face fines and other civil penalties. In 2006, the EPA deemed the water in Cañoncito unsafe to drink, forcing residents to use bottled water for drinking and cooking.

WRT and association officials are going over the designs of the system and should have it in place by November 2008. When installed, WRT’s treatment system will be able to process more than 6.7 million gallons of water annually.

Source: Water Remediation Technology, LLC

Sponsored Recommendations

2024 Manufacturing Trends Unpacking AI, Workforce, and Cybersecurity

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Blower Package Integration

March 20, 2024
See how an integrated blower package can save you time, money, and energy, in a wastewater treatment system. With package integration, you have a completely integrated blower ...