EPA and MassDEP Provide Update on Environmental Monitoring Following Fire

July 26, 2007

In response to the massive fire that broke out on July 21st at the Bernat Mill in Uxbridge, Mass., the U.S. Environmental Protection Agency (EPA) and the Massachusetts Deptartment of Environmental Protection (MassDEP) have been continuously monitoring the area to assess air and water quality impacts that may have resulted from the eight-alarm blaze. Before the fire destroyed a vast majority of the 350,000 sq. foot mill, it housed over 65 small businesses.

MassDEP continues to monitor water quality in the Mumford River, to determine if runoff water and oil from the fire site have impacted the river and its resources.

MassDEP has emergency contractors maintaining containment booms at six locations downstream from the fire site on the Mumford and Blackstone rivers to capture debris and floating oil on the surface.

The contractors are vacuuming oil off the surface of the river closest to the fire scene to aid in oil recovery from the river and at the Depot Street Bridge. An estimated 700 gallons of oil has been removed from the river to date.

MassDEP has sampled for water quality in the two rivers since Saturday, and results from samples taken Saturday and Sunday indicated the presence of VOCs, metals and heavy metals. Some of these results were above drinking water standards, however the Blackstone River is not a source of drinking water for any municipality or private system and these levels would not suggest a significant threat to wildlife. Additional sampling will take place this week to determine if water quality is improving.

No impacts have been detected to the Uxbridge groundwater wells downstream near the river, but the wells there have temporarily been shut down as a precaution.

Source: EPA

Sponsored Recommendations

2024 Manufacturing Trends Unpacking AI, Workforce, and Cybersecurity

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Blower Package Integration

March 20, 2024
See how an integrated blower package can save you time, money, and energy, in a wastewater treatment system. With package integration, you have a completely integrated blower ...