Joint EPA/State ECOS Agreement to Pursue Regulatory Innovation

Aug. 22, 2002
Alternative Treatment Technique for National Primary Drinking Water Lead and Copper Regulations for Certain Non-Transient, Non-Community Water Systems

EPA Region 5 is proposing to issue a variance under section 1415(a)(3) of the Safe Drinking Water Act (SDWA) for certain Non-Transient, Non-Community Water Systems (NTNCWSs) in the State of Michigan.

The final SDWA variance would be used to implement a project entitled "Use of Flushing to Meet the Federal Lead/Copper Regulation for Nontransient Noncommunity Public Water Supply Systems." This project is being proposed under the Joint EPA/State Agreement to Pursue Regulatory Innovation between the EPA and the Environmental Council of the States (ECOS).

All written comments on the SDWA draft variance should be sent to: Miguel Del Toral, USEPA Region 5, Ground Water and Drinking Water Branch, Mailcode WG-15J, 77 West Jackson Boulevard, Chicago, Illinois, 60604. Comments also may be faxed to Del Toral at (312) 886-6171 or sent via e-mail to [email protected]. Comments must be received on or before September 5, 2002.

To obtain a copy of the SDWA draft variance and other project documents, contact: Miguel Del Toral at the address above. The SDWA draft variance and other project documents also are available on the Internet at www.epa.gov/region5/water/notices.htm. Questions regarding the SDWA draft variance can be directed to Del Toral at (312) 886-5253.

Source: U.S. Environmental Protection Agency

Sponsored Recommendations

2024 Manufacturing Trends Unpacking AI, Workforce, and Cybersecurity

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

State of Smart Manufacturing Report Series

April 25, 2024
The world of manufacturing is changing, and Generative AI is one of the many change agents. The 2024 State of Smart Manufacturing Report takes a deep dive into how Generative ...

ArmorBlock 5000: Boost Automation Efficiency

April 25, 2024
Discover the transformative benefits of leveraging a scalable On-Machine I/O to improve flexibility, enhance reliability and streamline operations.

Blower Package Integration

March 20, 2024
See how an integrated blower package can save you time, money, and energy, in a wastewater treatment system. With package integration, you have a completely integrated blower ...