Related search terms from www.waterinfolink.com: desalination, RO, energy
Scientists have known that the Earth’s natural hydrologic cycle continuously desalinates water, using solar energy as the water evaporates from the oceans and lakes, leaving behind the salt and mineral content. The resulting freshwater vapors form clouds, which produce rain and snow. This natural cycle is the main reason why the oceans are salty. This hydrological cycle continuously moves salt from land to the oceans.
Since the fourth century, humans have tried to copy this natural cycle and have learned that “desalting” or “desalination” machines can be built with an energy input to produce freshwater from brackish and seawater sources.
Although there are many different types of desalination techniques, today the least energy-intensive method is a semipermeable membrane process, referred to as reverse osmosis (RO). Typical brackish water RO desalination uses a fraction of the energy required for seawater desalination (10% to 30%). Therefore, this fact sheet will focus on seawater desalination utilizing RO technology.
Energy is the largest variable cost for seawater RO (SWRO) plants, varying from one-third to more than one-half the cost of produce water.
The energy cost depends on the power/fuel pricing, type and degree of pretreatment, ocean salinity, concentrate disposal, regulatory requirements, land cost and conveyance of seawater to and product water from the desalination plant.
The theoretical absolute minimum amount of energy required by natural osmosis to desalinate average seawater is approximately 1 kWh/m3 of water produced, or 3.8 kWh per thousand gal (kgal). The actual SWRO power requirement in the 1970s was 7 to 9 kWh/m3 (26 to 34 kWh/kgal). With recent technological advancements and innovations in high-efficiency pumps, energy recovery systems and overall higher efficiency plants, the actual expected consumed power has reduced to 2.5 to 3.5 kWh/m3 (10 to 13 kWh/kgal).
No one will argue that seawater RO desalination still consumes much higher energy than conventional freshwater treatment plants or water conservation. However, desalination facilities should not be considered as the primary option in locations where reliable freshwater sources are available and considerable cost-effective water conservation, efficiency improvements and recycle and reuse are still possible.
In Perspective
But, let’s put SWRO desalination power requirements in perspective with the following statistics:
Based on nationwide data from the Energy Information Administration, a typical refrigerator’s average annual power usage is 1,400 to 1,500 kWh. Using the average U.S. water use per household of 100,000 gal per year, the power requirement for supplying desalinated water to a house in the U.S. will be less than that of an old refrigerator, but the same as a newer refrigerator’s power use.
The fuel required to fly a jumbo jet at cruising altitude will be adequate to provide SWRO-desalinated water to more than 300,000 homes in the U.S.
Based on the data from the Office of the Energy Markets and End Use, the average household annual power consumption is 11 mW. If the entire community is served by seawater-desalinated water, the annual power required for the desalination plant to serve a house is 1 mW, or an increase of less than 10%.
In most cases, however, the existing traditional supply sources are augmented with seawater and/or brackish water-desalinated waters, which further reduces the percent increase to typically less than 5%.
Community Goals
Opponents of seawater desalination typically only focus on the energy consumption and the climate impacts associated with the increased power generation. Instead of opposing a technology that is helping many areas throughout the world with water crises, it would more beneficial to all of us as a community to:
Find ways of improving desalination technology to further reduce the power requirements.
Find and expand other carbon- neutral energy sources such as wind, solar, nuclear and other innovative methods.
Ease the process of co-locating desalination and power plants to take advantage of the discarded thermal energy, reduce the burden on the power grid and make use of the lower off-peak power costs.
Water agencies can also incorporate the value of the reliability and water quality advantages of membrane desalination when comparing traditional supplies (if available) to desalination. With recent concerns over the discovery of pharmaceuticals and personal care products in drinking water supplies, it is only fair that such comparisons include values and advantages of membrane technologies. Additionally, the value of seawater desalination, a new supply which is under local control and is essentially independent of climate changes and land use, should be carefully considered when comparing desalination to other alternatives.
In summary, when traditional supply sources are not feasible or available, seawater desalination can be achieved in an environmentally friendly manner, without aggravating climate change concerns.