Griffin Pump & Equipment

Houston, US 77020
713.671.7000
713.675.4820

More Info on Griffin Pump & Equipment

Griffin has always focused on building rugged pumping equipment that would keep pace as we improved many of the now classic dewatering techniques such as well points, jetting and eductor systems. That innovative drive exists today in meeting the high flow requirements for large sewer bypass jobs and maintaining low noise level in residential areas with the silent package pumps. Griffin Pumps provide the highest air-handling capacity in the market and are uniquely designed to address the needs encountered in dewatering, sewer bypass, open pumping and submersible pump applications. Griffin pumps give trouble-free service and perform continuously for extended periods with minimal maintenance.

Products

griffin_rs
Electric submersible pumps are available for flows as low as a few gallons per minute to several hundred gallons per minute, with head conditions to several hundred feet. These...
Aug. 8, 2018
Griffin-non-clog-pumps
Siphoning, supplying or draining water has its challenges—especially when that liquid is full of obstructing debris. Griffin non-clog pumps are the ideal solution. These pumps...
April 3, 2018
griffinWeb3
The 77-hp, 10-in. Griffin electric submersible trash/sewage pump is capable of flows up to 5,500 gal per minute with up to 90 ft of head. The pump has 5-in. solids handling capacity...
April 3, 2018
griffin_Submersible-Pumps
Electric submersible pumps are available for flows as low as a few gallons per minute to several hundred gallons per minute, with head conditions to several hundred feet. These...
April 3, 2018
griffinWEB2
Stainless steel hydraulic sumbersible pumps, with the ability to withstand corrosive environments and handle large volumes of water, are available in axial flow and trash-handling...
April 3, 2018
griffinWEB1
These nonclog pumps are capable of handling debris up to 4.5 in. and feature a cleanout/inspection port for hassle-free removal of debris over 4.5 in. The port cover can be removed...
April 3, 2018
griffinWEB4
Griffin Pump’s three-stage, water-jet pumps are now being built with tier three engines to meet the strictest environmental regulations. The hi-pressure, hi-flow, hi-head capacity...
April 3, 2018
griffinWEB
Griffin Pump’s hydraulic submersible pumps handle solids of 3 in., flows to 20,000 gpm and heads to 120 ft, and come in sizes of 4 in. to 24 in. Designed to run dry without damaging...
April 3, 2018
Griffin_NonClog-Pump1
These pumps are capable of delivering flow of more than 17,000 gpm and head capacities of 240 ft or more. Griffin non-clog pumps are an ideal solution for sewer bypasses, sumping...
April 3, 2018
Griffin_NonClog-Pump
These pumps are capable of delivering flow of more than 17,000 gpm and head capacities of 240 ft or more. Griffin non-clog pumps are an ideal solution for sewer bypasses, sumping...
April 3, 2018

Articles

Sewer Bypass May 2011
Boosting pumps to achieve higher pressure
April 12, 2013
Stainless_Steel_Impellers_smaller_cutout
Tips for working with wastewater turbines
May 3, 2011

Additional content from Griffin Pump & Equipment

900 foot of head capacity water pump
The Three Stage jet pump is capable of delivering flow of more than 1,400 gpm, head conditions up to 900 ft and 370 psi. Pumps are intended for use in pipe jetting, as well as...
April 3, 2018
Griffin Pump submersible
Stainless steel hydraulic submersible pumps have the ability to withstand corrosive environments. They are available in trash, axial flow and material-handling models. The pumps...
April 3, 2018
Screen Shot 2013-03-26 at 9.19.29 AM
Griffin’s self-priming trash pumps are available in 4- and 6-in. models that do not require additional priming systems. These pumps are capable of head conditions exceeding 125...
April 3, 2018
2_NonClog_Pumps_Lift_Station
These wastewater handling pumps are effective for sewer bypass applications; pumping polluted or corrosive wastewater containing sand, mud or solids in suspension; backing up ...
April 3, 2018
Axial_Flow_Pump
Axial flow pumps are ideal for high flow situations. The main advantage of an Axial flow pump is its relatively high discharge. For example, it can pump up to three times more...
April 3, 2018
Griffin_Stainless_Steel_Submersible_12_inch_Pump1
Hydraulic submersible pumps are available in trash and axial flow models. They are designed for handling sludge, trash, raw sewage, clear liquid and industrial effluent. The pumps...
April 3, 2018
Griffin Pump
Griffin offers large-volume polypropylene and polyethylene tanks and pipe. The tanks, up to 50,000 gal in capacity, are structurally strong and dimensionally stable. They are ...
April 3, 2018
Griffin_0
Stainless steel hydraulic submersible pumps are available in axial flow and trash-handling models. Pumps are available from 4 in. to 24 in., handle water up to 20,000 gpm and ...
April 3, 2018
Griffin
Griffin Pumps offers a nonclog pump capable of handling debris up to 4.5 in. and a large cleanout port for hassle-free removal of large debris over 4.5 in., without removing suction...
April 3, 2018
Griffin Pump Image for Oct 11 NPS_edit
Three-stage jet pumps offer high-pressure, high-flow and high-head capacity. Pumps are capable of delivering a flow of more than 1,400 gpm with head conditions up to 900 ft. The...
April 3, 2018
Tallasshee_Pump_2011a (2)
Griffin Pump & Equipment offers a variety of silent pumps with capacities of more than 20,000 gpm. Large cleanout allows for debris removal from the impeller without detaching...
April 3, 2018
trashpumps_rspump
Griffin’s trash pumps have been implemented in projects for more than 70 years, and can provide either diesel-driven, gasoline-driven or submersible trash pumps. Trash pumps are...
April 3, 2018
trashpumps
Griffin’s trash pumps have been implemented in projects for more than 70 years, and can provide either diesel-driven, gasoline-driven or submersible trash pumps. Trash pumps are...
April 3, 2018
12T_Griffin_Submersible_PumpheadWEB
Griffin Pump’s hydraulic submersible pumps handle solids of 3 in., flows to 20,000 gpm and heads to 120 ft, and come in sizes of 4 in to 24 in. Designed to run dry without damaging...
April 3, 2018
24AX_Vegas_2011
One 24-in. axial flow pump can pump 20,000 gpm and has a 35-ft head capacity. The pump is ideal for high flow situations. It has a relatively high discharge and can pump up to...
Oct. 9, 2012
Griffin_Trailer_Mounted_Dewatering_Pump
Griffin non-clog pumps power through both water and debris. Pumps can deliver flows exceeding 17,000 gpm and provide head capacities of 240 ft. Griffin non-clog pumps are an ideal...
Oct. 24, 2011
Griffin_Submersible_Sewage_Pump1_edit
This 77-hp, 10-in. electric submersible trash pump is capable of flows up to 5,500 gpm, 90 ft of head and 5-in. solids handling capacity. The company offers a complete line of...
Aug. 31, 2011