Confronting Corrosion

Jan. 11, 2010

About the author: Rich Schici is a process engineer for In-Pipe Technology Co., LLC. Schici can be reached at 630.871.5844 or by e-mail at [email protected].

Related search terms from hydrogen sulfide corrosion, wastewater infrastructure

Consequences of extensively damaged sewers have prompted the U.S. Environmental Protection Agency (EPA) to conduct a national assessment of the problem, resulting in reports to Congress and technical handbooks for municipalities throughout the country. EPA reports conclude that the costs to repair or replace pipes, equipment and structures deteriorated by H2S corrosion may exceed the cost several times over to control the corrosion and avoid infrastructure damage. Nationally, the cost to repair corrosion damage by H2S is in the billions of dollars, and many communities will spend millions of dollars in coming years to correct corrosion problems.

It is evident that a means to detect, control and correct H2S corrosion in existing wastewater systems is the preferred alternative to premature replacement of system components. Several methods available to control the rate of H2S corrosion focus on chemical injections. The most common chemical alternatives are costly and, in some cases, hazardous. Chemicals are fed at limited locations where the problems are generally the most severe; however, within a network of sewers that transports wastewater over thousands of square feet of collection system infrastructure, only a small portion of the sewer is protected.

As wastewater is transported, sewage velocity, wastewater characteristics, detention time and temperature provide dissolved oxygen such that the concentrations of organic material and nutrients increase the rate of sulfide generation. One technology provides a biological alternative to decrease H2S emission in sewers. It includes regular additions of a highly concentrated formulation of facultative soil bacteria at multiple strategic locations throughout the entire collection system in accordance with an engineered treatment plan.

The technology enhances the microbial community in the sewer such that more reactions occur in the sewer biofilm, a community of microorganisms similar to a trickling filter, a rotating biological contactor or rocks in natural streams that contribute to increased metabolism of wastewater compounds. The biofilm is composed of extracellular polymeric substance or exopolysaccharide, which is the sticky organic matter or slime produced by microbes and responsible for cell adhesion in biofilms.

By reducing the quantity of H2S available to be biologically converted to sulfuric acid, the rate of corrosion is controlled. Municipalities use this technology in the outreaches of the collection system to provide greater system coverage and extend the life of existing infrastructure.

What Causes H2S Corrosion?

H2S is an odorous, toxic gas. In the absence of dissolved oxygen and in the presence of soluble biological oxygen demand, Desulfovibrio desulfuricans and other sulfate-reducing bacteria (SRB) convert the sulfate to sulfide. Sulfate is biologically reduced to sulfide in the sewer biofilm, which accumulates on pipe walls and in wet wells. H2S corrosion can occur by two mechanisms: acid attack resulting from the biological conversion of H2S gas to sulfuric acid in the presence of moisture and direct chemical reaction with metals. The first mechanism is the principle cause of internal sewer corrosion.

SRB generate H2S in the anaerobic parts of the wastewater system using sulfate as the final electron acceptor. In the absence of sulfate, certain strains of SRB can use a single carbon compound as both the electron donor and an electron acceptor by a process called dismutation. The SRB generally are thought to be obligate anaerobes, but recently it has been determined that they can tolerate oxygen for short periods of time and proliferate in the presence of oxygen. Several of these types of bacteria are commonly found in the human colon, such as Desulfovibrio and Desulfobacter.

Each year, deaths result from municipal workers’ exposure to H2S gas in confined spaces. Odor complaints result from neighbors living near wastewater systems who are exposed to low levels of the gas. Atmospheric H2S levels can be reduced by controlling the amount of dissolved sulfide available in the wastewater. The basic goals and treatment levels must be developed individually for each system, but EPA guidelines target dissolved sulfide levels below 0.3 mg/L to control H2S corrosion.

Biological Process Description

Far upstream in the collection system, where conditions are optimal for sulfide generation, H2S corrosion takes place. Miles of existing sewer piping contain various layers and amounts of biofilm. The added facultative bacteria grow throughout the interior surface of the sewer pipes and dominate the sewer biofilm through the microbiological principal of competitive exclusion. By out-competing the SRB for nutrients, the high concentrations of beneficial microbes grow and populate the sewer pipes and lift station wet wells to optimize the entire infrastructure.

Over time, the added facultative bacteria convert the biofilm on the interior surface area of the infrastructure into a controlled, beneficial microbiological population. Organisms in the biological formulation are heterotrophic facultative anaerobes that can grow quickly in either anoxic conditions using nitrate as a final electron acceptor or aerobically using oxygen as the final electron acceptor and at any stage in between using fermentation. The added bacteria have a competitive advantage over the SRB, but only if they are added at a higher level than occurs in normally untreated conditions.

Performance History & Discussion

In a study of In-Pipe Technology Co., LLC conducted by Dr. Eberhard Morgenroth of the University of Illinois, a molecular analysis was performed on biofilm with In-Pipe bacteria using terminal-restriction fragment length polymorphism. The study identified a shift in the dominant populations of microorganisms that decreased dissolved sulfides 50% after continuous addition for 20 days from 0.45 mg/L to 0.23 mg/L. The reason is due largely to bacteria that are more flexible to convert organic matter, allowing gradual repopulation of the biofilm and preventing the proliferation of SRB.

At the 0.5-million-gal-per-day (mgd) Riverwood Community Wastewater Treatment Plant and collection system in Port Charlotte, Fla., In-Pipe service began in October 2009 with goals to remove deposits of fats, oils and grease (FOGs) and control corrosion. After an engineering review of the collection system, In-Pipe installed 13 dosing points throughout the system to dispense microorganisms into the sewer. The results after 30 days demonstrated that atmospheric H2S decreased 80% from 605 ppm to 123 ppm and solution sulfides decreased to levels at or below 0.3 mg/L.

At a 15-mgd plant in Sioux City, Iowa, In-Pipe service began in May 2007 with goals to control corrosion and FOGs in the collection system and reduce the influent organic load. In-Pipe installed 80 dosing points throughout the collection system and introduced high concentrations of additional microbial formula at select locations over 28 months. The results demonstrated significant improvements at several locations in the collection system; solution sulfides decreased 90% from 5 mg/L to 0.5 mg/L, and atmospheric values decreased 80% from 146 ppm to 29 ppm.

The In-Pipe approach identifies existing and potential corrosion problems by reviewing collection system maps, odor complaint logs and specific sewer appurtenances at many locations within the system. Field service technicians conduct inspections and H2S surveys at potential problem areas by measuring atmospheric and solution sulfides at locations upstream. This provides a matrix of corrosion rates at known problem areas in addition to discovering sources of H2S, allowing the company to engineer a custom plan for biological treatment in the outer reaches of the collection system to control H2S corrosion and protect as much as 80% of the existing infrastructure.

It is essential that corrosion problems be identified early, while the corrosion can still be controlled. Establishing biological treatment to decrease H2S emission in sewers by reducing the quantity of H2S available to be biologically converted to sulfuric acid controls the rate of corrosion. Lowering dissolved sulfide levels will control H2S corrosion. The end result will be collection systems and treatment facilities that last longer and operate more efficiently.

Download: Here

About the Author

Rich Schici

Sponsored Recommendations

Get Utility Project Solutions

June 13, 2024
Lightweight, durable fiberglass conduit provides engineering benefits, performance and drives savings for successful utility project outcomes.

Energy Efficient System Design for WWTPs

May 24, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.

Meeting the Demands of Wastewater Treatment Plants

May 24, 2024
KAESER understands the important requirements wastewater treatment plant designers and operators consider when evaluating and selecting blowers and compressed air equipment. In...

Modernize OT Cybersecurity to Mitigate Risk

April 25, 2024
Rockwell Automation supports industry-leading Consumer Packaged Goods company, Church & Dwight, along their industrial cybersecurity journey.