Industrial RO System 2

Oct. 29, 2008

In the Middle East, fresh water is becoming more and more difficult and expensive to obtain. As a result, countries are investing in alternatives in water purification such as reverse osmosis and desalination.

In May 2007, Pure Aqua successfully supplied a water treatment package consisting of a reverse osmosis (RO) system to produce 200 gpm of product from 250 gpm feed, antiscalant chemical dosing, perchlorination chemical dosing, acid injection and dechlorination dosing systems.

Systems & Process

Feedwater to the system is processed water with raw water TDS of about 1,500 ppm. The system design was based on high rejection of TFC spiral-wound low-fouling membranes.

The RO system was selected from Pure Aqua’s RO-500 Series, model number BW-360K-8680-3. It produces 200 gpm of drinking water with TDS less than 100 mg/L.

The RO unit consists of 5-micron cartridge filters to reduce the feed water silt density index and to limit the SS to 5-micron size.

Sponsored Recommendations

Get Utility Project Solutions

June 13, 2024
Lightweight, durable fiberglass conduit provides engineering benefits, performance and drives savings for successful utility project outcomes.

Energy Efficient System Design for WWTPs

May 24, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.

Meeting the Demands of Wastewater Treatment Plants

May 24, 2024
KAESER understands the important requirements wastewater treatment plant designers and operators consider when evaluating and selecting blowers and compressed air equipment. In...

Modernize OT Cybersecurity to Mitigate Risk

April 25, 2024
Rockwell Automation supports industry-leading Consumer Packaged Goods company, Church & Dwight, along their industrial cybersecurity journey.