100,000 Gallons of Sewage Spills Into River in Colorado

July 17, 2007

A spill at the Littleton-Engelwood Wastewater Treatment Plant sent 100,000 gallons of raw sewage into the South Platte River. Officials have reported that the damage did not have a strong affect on water quality.

The spill occurred due to a mechanical failure that caused tank overflows that sent sewage into the plant and into storm drains that went to the South Platte River. Plant manager Dennis Stowe told Rocky Mountain News that the spill lasted 20 to 25 minutes.

A regulator at the Colorado Department of Public Health and Environment reported to Rocky Mountain News that the sewage was diluted from the river and the bacteria levels in the river were higher upstream of the plant than downstream of the spill.

Littleton-Englewood officials notified both regulators and the city of Thornton, Colo., which uses the river for drinking water. In response, Thornton shut off its intake valves to allow the contaminated water to pass.

This is the largest spill in the area in the last 12 to 15 years.

Source: Rocky Mountain News

Sponsored Recommendations

Blower Package Integration

March 20, 2024
See how an integrated blower package can save you time, money, and energy, in a wastewater treatment system. With package integration, you have a completely integrated blower ...

Strut Comparison Chart

March 12, 2024
Conduit support systems are an integral part of construction infrastructure. Compare steel, aluminum and fiberglass strut support systems.

Energy Efficient System Design for WWTPs

Feb. 7, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.

Blower Isentropic Efficiency Explained

Feb. 7, 2024
Learn more about isentropic efficiency and specific performance as they relate to blowers.