Three Massachusetts Developers Face Fines for Clean Water Act Violations

Oct. 5, 2007

Discharges of muddy storm water from a construction site, in violation of the federal Clean Water Act, has prompted EPA to file an enforcement action seeking penalties against two residential construction companies and an excavating company.

The three companies, Alden Woods, Inc., C.B. Blair Development, and McManus Excavating, are developing a 124-lot subdivision in Holden, Mass. Sediment laden storm water was repeatedly observed discharging from the construction site to nearby Chaffins Brook, which is ranked as a “Class A” waterway by Massachusetts.

The companies failed to install and maintain controls sufficient to prevent the muddy discharges to the stream. EPA is seeking a proposed penalty of $157,500 from each operator of the Holden subdivision.

Because they are operators of a site disturbing more than one acre, the companies were required to apply for either an individual permit or a promulgated General Permit for Storm Water Discharges from Construction Activities. The permit requires the use of “best management practices” to prevent erosion and sedimentation of waterways that can result from construction activities. Though construction began in 2002, none of the operators applied for a NPDES permit until February 28, 2006.

Rainwater running off construction sites can carry sediments, oil and other pollutants which contaminate nearby streams, ponds and rivers. Erosion from a one-acre construction site could discharge as much as 20 to 150 tons of sediment in one year if not properly managed. Sediments reduce the storage capacity of drains and waterways, causing flooding and adversely affecting water quality and fish habitat. Sediments and chemicals can also contribute to fish die-offs, toxic algae blooms, contaminated shellfish beds and closed swimming beaches.

Source: U.S. Environmental Protection Agency

Sponsored Recommendations

Blower Package Integration

March 20, 2024
See how an integrated blower package can save you time, money, and energy, in a wastewater treatment system. With package integration, you have a completely integrated blower ...

Strut Comparison Chart

March 12, 2024
Conduit support systems are an integral part of construction infrastructure. Compare steel, aluminum and fiberglass strut support systems.

Energy Efficient System Design for WWTPs

Feb. 7, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.

Blower Isentropic Efficiency Explained

Feb. 7, 2024
Learn more about isentropic efficiency and specific performance as they relate to blowers.