Azalea Ridge Subdivision Pump Station

June 10, 2022
After review of several options, a DuroMaxx® SRPE sanitary sewer overflow (SSO) system was selected for a new housing development.

City, ST: Mount Holly, NC

Application: Sanitary Sewer

Owner: DR Horton Homes 

Engineer: DPR Associates 

Contractor: CMH Solutions, LLC 

Installation: March 2022

Technical Description: 

  • Product: DuroMaxx® SRPE SSO 
  • Diameter: 96-in.
  • Length: 31 LF
  • Storage: 11,295 gallons

Mount Holly is a small suburban city located within Gaston County, North Carolina. With a booming housing market, expansion and improvements to the local community is essential. Recently, a new housing community was developed called Azalea Ridge. Located conveniently off Highway 27, this new development features open, modern floor plans and a multitude of amenities including scenic nature trails and several playgrounds.

As part of this housing development, a new sanitary sewer overflow system was needed to account for the expansion. After review of several options, a DuroMaxx® SRPE SSO system was selected. The tank was installed adjacent to a wet well for a residential sanitary lift station, designed to serve a 65-lot housing community. This station will be used to move effluent out of the subdivisions to a sanitary trunk line where it can make its way to the local wastewater treatment facility. In the event of a large rainstorm or pumping issue, this tank would provide expansion to the original system.

DPR Associates selected the DuroMaxx system as it was both watertight per ASTM D3213 standards and resistant to hydrogen sulfide gas produced in sanitary systems. The 96-inch diameter, 31’ long DuroMaxx® SRPE SSO system was designed to capture a volume of 11,295 gallons and included a 30-inch diameter access riser to provide a straightforward inspection and maintenance process.

The installation for the DuroMaxx SSO tank was straightforward and efficient. Given the lightweight characteristic of the DuroMaxx tank, it was delivered as a single unit, weighing only 3,000 pounds, and was easily installed without the use of a large crane. Additionally, no concrete formwork, curing, striping, or waterproofing was required in the installation.

The contractor, CMH Solutions of North Carolina, had previously installed another DuroMaxx SRPE tank used for another lift station located in Lincolnton, North Carolina and was very familiar with both the system as well as the efficient installation process.

Sponsored Recommendations

Blower Package Integration

March 20, 2024
See how an integrated blower package can save you time, money, and energy, in a wastewater treatment system. With package integration, you have a completely integrated blower ...

Strut Comparison Chart

March 12, 2024
Conduit support systems are an integral part of construction infrastructure. Compare steel, aluminum and fiberglass strut support systems.

Energy Efficient System Design for WWTPs

Feb. 7, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.

Blower Isentropic Efficiency Explained

Feb. 7, 2024
Learn more about isentropic efficiency and specific performance as they relate to blowers.