USGS Study Shows Fluorescence Useful in Measuring Water Quality

Dec. 17, 2010
Study used fluorescence to measure dissolved organic carbon in surface water

Scientists at the U.S. Geological Survey (USGS) have shown that measuring fluorescence could improve source water monitoring during a study of the McKenzie River in Oregon. The study was designed to assess the amount, type and source of dissolved organic carbon that exists in all sources of drinking water.

Dissolved organic carbon can react with chlorine during water treatment and form halogenated compounds, commonly referred to as disinfection byproducts. Some of these byproducts are regulated by the U.S. Environmental Protection Agency, but a lack of strict controls and guidelines underscores the need for better understanding of sources for dissolved organic carbon. Measuring optical properties allows for researchers to account for concentration, composition and source of dissolved organic carbon, as well as its propensity to form disinfection byproducts.

In 2007 and 2008, water samples from the McKenzie River mainstream, tributaries and reservoir outflow were analyzed by scientists from USGS in collaboration with the Eugene Water and Electric Board. Optical measurements assessed the full spectrum of fluorescence and absorption to provide an understanding of dissolved organic carbon properties and patterns, and to ascertain the benefits of using such measurements.

Results indicated sources of dissolved organic carbon and disinfection byproduct precursors originated upstream. They are most likely the consequence of human activity and are strongly linked to changes in the flow path of the waterway. Downstream tributaries did contain higher dissolved organic carbon concentrations; however, they comprise less than 5% of the mainstream flow and therefore do not have a significant impact on drinking water.

Although there was interference while measuring the absorbance spectra, the study presented conclusive evidence illustrating the value of measuring optical properties.

“Optical measurements have the potential to be less expensive, faster and more sensitive than laboratory chemical-based analyses,” says Tamara Kraus, one of the authors of the study. According to Kraus, instruments that measure optical properties have recently been developed and have the potential to help water utilities understand the trends in water quality. She suggests that it would be more feasible and cost-effective to lower the amount of disinfection byproduct precursors than establishing additional water treatment technologies.

The full study is available in the November/December 2010 issue of the Journal of Environmental Quality.

Source: Newswise

Sponsored Recommendations

Blower Package Integration

March 20, 2024
See how an integrated blower package can save you time, money, and energy, in a wastewater treatment system. With package integration, you have a completely integrated blower ...

Strut Comparison Chart

March 12, 2024
Conduit support systems are an integral part of construction infrastructure. Compare steel, aluminum and fiberglass strut support systems.

Energy Efficient System Design for WWTPs

Feb. 7, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.

Blower Isentropic Efficiency Explained

Feb. 7, 2024
Learn more about isentropic efficiency and specific performance as they relate to blowers.