Utility board seeks OK to let wells flow again

Aug. 11, 2004

In an effort to bring the district's contaminated wells back into service, the Pascoag Utility District met with the state Department of Health last month. The board of utility commissioners unanimously supported formally seeking approval from the state Health Department to use the wells again.

"It's too large a water supply to just walk away from," said board Chairman Albert G. Palmisciano.

In August 2001, Pascoag's water supply was contaminated with the gasoline additive methyl tertiary-butyl ether, or MTBE. Recent work on the well has given Pascoag officials hope. A test of the wells found MTBE concentrations at 40 to 70 parts per billion, compared to 2001, when they were at more than 700 ppb. The Health Department advisory is set at 40 ppb.

The Health Department set forth a list of issues to be addressed. Which included both the MTBE contaminating in the ground water and what was learned by how fast the contamination affected this well. They also need to consider the high costs of treatment, frequent monitoring and reducing the vulnerability of the well should also be considered, stated the cheif of the department's Office of Drinking Water Quality, June Swallow. She also statedthat, "The costs for installing a treatment system at the wellhead, which can be tricky because it needs to address a particular level of contamination."

The Environmental Protection Agency has committed $2 million in grants, and has discussed an additional $1 million.

Source: EPA

Sponsored Recommendations

Blower Package Integration

March 20, 2024
See how an integrated blower package can save you time, money, and energy, in a wastewater treatment system. With package integration, you have a completely integrated blower ...

Strut Comparison Chart

March 12, 2024
Conduit support systems are an integral part of construction infrastructure. Compare steel, aluminum and fiberglass strut support systems.

Energy Efficient System Design for WWTPs

Feb. 7, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.

Blower Isentropic Efficiency Explained

Feb. 7, 2024
Learn more about isentropic efficiency and specific performance as they relate to blowers.