Colorado Springs Selects USFilter Odor Control System for Waste Water Upgrade

March 1, 2004

Colorado Springs is building a 20-mgd wastewater treatment plant in the center of town. In this location, not only must the plant be aesthetically pleasing, but it must also have the best in odor control technology.

To meet its needs, the city is installing three LO/PRO systems and two carbon adsorbers, manufactured by USFilter RJ Environmental Products, Poway, Calif. The odor control treatment system will include a multi-pass chemical scrubber followed by a carbon adsorption secondary polishing stage. Each LO/PRO wet chemical scrubbers is designed for 17,150 cfm. The carbon adsorbers are designed for 60,000 cfm each.  The city intends to operate two duty units and one complete system in standby mode.

The primary focus of the odor control system will be to reliably and efficiently treat plant emissions to avoid any off-site odor impact. The overall odor control strategy is to minimize odor production and then enclose or cover all odor sources and effectively capture and treat odors with reliable and amply sized systems. The plant design minimizes hydraulic jumps and other conditions that would otherwise promote the release of volatile odor-causing compounds.

According to Dennis Auge, project manager, Colorado Springs Utilities, the city evaluated several different systems for the Northern Water Reclamation Facility project. "eight was a concern due to the covered design of the plant. The USFilter systems offer a unique footprint and are not very tall."

The project, designed by Brown & Caldwell, Golden, Colo., will cost $68 million and two years to complete.

Source: USFilter

Sponsored Recommendations

Blower Package Integration

March 20, 2024
See how an integrated blower package can save you time, money, and energy, in a wastewater treatment system. With package integration, you have a completely integrated blower ...

Strut Comparison Chart

March 12, 2024
Conduit support systems are an integral part of construction infrastructure. Compare steel, aluminum and fiberglass strut support systems.

Energy Efficient System Design for WWTPs

Feb. 7, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.

Blower Isentropic Efficiency Explained

Feb. 7, 2024
Learn more about isentropic efficiency and specific performance as they relate to blowers.