United Kingdom's First Reservoir Management System Marks Two Years of Successful Operation

Oct. 11, 2005

In September 2005, the United Kingdom's first RMS Water Storage Management System, installed at the Severn Trent Water Diamond Avenue site in Mansfield, marked its second year of successful operation.

With installations in 60 reservoirs around the world, the RMS system from Severn Trent Services has revolutionized water storage management. Stored bodies of water are subject to thermal stratification, stagnation and the blending of different water qualities.

It is notoriously difficult to ensure thorough mixing of free chlorine or chloramines disinfectant in order to maintain a constant residual level. The RMS system enables water utilities to maintain uniform chlorine-related water quality and temperature uniformity within large water storage bodies through a self-regulated process that detects chlorine levels in real-time water quality samples. The precise amount of disinfectant is then dosed to maintain a constant predetermined level.

The desired disinfectant residual level at Diamond Avenue was 0.3 mg/l. Two 9-ML reservoirs are used to store water before it is distributed to the Nottinghamshire area. Previously, chlorine tablets were added at the reservoir inlet to increase disinfectant levels, but this resulted in poor control, with residuals dropping to 0.1mg/l. Neither inlet nor outlet dosing was considered appropriate due to the fluctuating 16-ML/day flow rates. Both reservoirs were exhibiting reversed flow with changing pressures in the distribution system.

The powerful RMS system was initially tested for a period of six days, during which 70 samples were taken from 10 locations across the reservoir to give the overall picture of the chlorine distribution. A six-day trial of the RMS system using fixed rate dosing indicated that the distribution of chlorine across the reservoir was even and responded in a linear manner.

After the trial, the RMS was put into permanent operation and has retained control of the residual regardless of water level or flow pattern. The innovative RMS technology has delivered a data set which compare favorably with a reservoir in which the disinfectant has been calculated to be perfectly mixed.

Stuart Crymble, senior process engineer, Technology and Development of Severn Trent Water, said, "The RMS system is attaining residual control which was never achievable with previous dosing methods."

"We are delighted with the results of our first UK installation," said Julian Routh, technical manager for Severn Trent Services. "The RMS technology is delivering unrivalled disinfection control and management. And other Severn Trent Services' equipment can be integrated with the RMS system to provide a complete water storage management solution, including the ClorTec on-site sodium hypochlorite generator and the CL1000B bufferless chlorine analyser."

Source: Severn Trent Services

Sponsored Recommendations

Blower Package Integration

March 20, 2024
See how an integrated blower package can save you time, money, and energy, in a wastewater treatment system. With package integration, you have a completely integrated blower ...

Strut Comparison Chart

March 12, 2024
Conduit support systems are an integral part of construction infrastructure. Compare steel, aluminum and fiberglass strut support systems.

Energy Efficient System Design for WWTPs

Feb. 7, 2024
System splitting with adaptive control reduces electrical, maintenance, and initial investment costs.

Blower Isentropic Efficiency Explained

Feb. 7, 2024
Learn more about isentropic efficiency and specific performance as they relate to blowers.