Units resist contamination due to lack of small-diameter control apertures
Festo has introduced the VZXF  line of angle-seat valves. These new valves are equally suitable for gaseous and fluid applications, and are ideal for control of media flows, whether contaminated or highly viscous, at up to 600 sq mm per second. A VZXF unit is insensitive to contamination because it does not have small-diameter control apertures.
Water hammer effects that tend to induce component wear are not an issue with VZXF valves because the valves close in the direction of media flow for gases and close against the direction of media flow for fluids. For safety, these valves automatically close on pressure loss in the control circuit. VZXF valves operate without the need for any pressure differential.
The VZXF are 2/2-way valves that are normally closed. These poppet-style valves have spring returns and are compatible with external Festo control. Fittings are available in both NPT and G threads. These brass or stainless steel units can be mounted in any position. Seat-seal material is available in Brass, NBR and PTEF. Sizes range from 0.5 to 2 in. Normal pressures are PN 10 and PN 16. Flow rate is Kv 2.8–47.5 cu meters per hour.
“The new VZ series of valves brings gas and liquid valve solutions to Festo’s process  offerings that already include lines of ball, butterfly and gate valves and automated controls,” said Craig Correia, Festo process industry segment manager. “The fact customers can now come to Festo for a host of process solutions as well as discrete options brings a lot of value in terms of a one-stop-shop for some of the best automated solutions in the world. If OEMs and end users are not familiar with Festo or were a customer in the past, it’s time to take a new look at our company.”