Some engineering firms still harbor the misconception that
prefabricated systems are too small to handle the enormous volumes of water
that municipalities and private water companies transport. Though once limited
to certain-size projects, technological innovations and manufacturing
breakthroughs have dramatically expanded the application of prefabricated pump
systems over the past several years.
Just as the introduction of fiber optics and digital
subscriber lines (DSL) dramatically opened up the information pipeline,
technology has significantly changed the amount of fluid that a prefabricated
system can move. By working closely with engineering and consulting firms,
manufacturers have pioneered new ways to build systems on a much larger scale
that can cost-effectively and efficiently serve municipalities and water works
companies. Advancements such as computer-aided design (CAD) and computerized
numerical control (CNC) devices have made it practical, and preferable, to
prefabricate custom pump stations ranging from 10 gpm to more than 15,000 gpm.
Size No Longer a Barrier
The most important industry innovation has been the
emergence of new software tools that allow designers to easily create pump
station modules. This has made building large prefabricated pump systems common
for a prefabricated pump station manufacturer.
While once thought to be impossible, complex systems now can
be built to tight tolerances and delivered anywhere in North America. For
instance, a 60-foot-long station was transported to a site on six flatbed
trucks and assembled in a few days to the city of El Dorado, Ark., in 2001. The
process went flawlessly.
El Dorado is a picturesque city that experienced a
population boom in the 1990s. The city's original wells were built too close
together. The water could not be replenished fast enough to meet the city's
water demands. In addition, El Dorado also experienced drought conditions over
the past few years. To make it through another summer, the city elected to
create a new water works system that could meet the growing demand.
El Dorado built new wells and elected to install a
prefabricated pumping system to siphon water from a pair of two-million-gallon
ground storage tanks and deliver it to the distribution system. The assembled
modular station's skid measured 16" x 58" with an outflow capacity of
8,000 gpm. The pipe system was internally lined with fusion-bonded epoxy. The
station included smooth controllers to avoid pipe surges and water hammer.
Using CAD drawings, project engineers precisely matched the station's footprint
with the correct electrical wiring and piping design.
The complete skid was designed and built to be easily broken
into six sections. It was completely fabricated, assembled, tested and
disassembled to ensure that all centerlines were met and ensure that all the
proverbial "pieces of the puzzle" formed a seamless closure and
completely uninterrupted picture.
According to Craig Johnson, P.E., project manager at
Carter-Burgess, Inc., a firm specializing in planning engineering, architecture
and construction management, "Typically, the size and pumping capacity we
needed was met with a site-built station. But, a manufacturing firm was able to
meet our needs and, most importantly, meet our deadlines with one of their
The system was delivered on time and within budget. The
evolving technology incorporated into modular pumping systems can allow
municipalities to create more efficient water works systems. Systems can be
designed to pump large volumes of water and allow for easy expansion to keep up
with growing population demands.
Prefabricated pumping systems are no longer small, cookie
cutter or one size fits all solutions. One of the most important advantages of
a prefabricated pump station is that the modular units usually cost less to
design, manufacture and install than traditional stick-built systems.
With stick-built systems, the full burden of design and
construction is placed on engineers and contractors who may not be versed on
the latest pump system technologies. In those cases, an engineering firm must
design the system and gather the components from various manufacturers that are
delivered for final assembly at the site. During this tedious process, numerous
problems can arise, such as weather delays, job site manpower coordination and
late equipment/supply deliveries that can create cost overruns.
Prefabricated systems are more cost-effective because parts
and pumps have been purchased in bulk, standard components such as controls
have been pre-assembled and people experienced in designing, building and
testing stations make certain every specification is met. Once complete, the
station arrives on site installation-ready. Within a few days, possibly even
hours, the station is generally on-line and ready to pump.
Finger Pointing Eliminated
With the single source accountability of prefabricated stations,
engineers, contractors and end-users no longer need to deal with multiple
companies or various warranties. One call is made to a single company and a
technician is dispatched to correct the problem wherever it may be found within
With stick-built systems, the opposite is true. A myriad of
problems can crop up. Solving these problems can be a challenge. With
mechanical problems, the result often is costly, as well as time consuming to
Improving the Breed
Another advantage of working with prefabricated systems
manufacturers is their ability to integrate technological advances within
products. For example, a product is currently on the market that increases the
energy savings of a variable frequency drive (VFD) system by adjusting the
discharge output based on demand. By using sophisticated flowmeters to take
precise measurements, this software ultimately lowers leakage rates.
In addition, some manufacturers leverage electronic tools to
decrease the time it takes for the submittal and design process. Offering
electronic submittals and product configuration tools will greatly decrease the
amount of time engineers have to spend on the pumping aspect of their projects.
By studying and understanding pump applications across
industries, high-end prefabricated manufacturers have created options for
engineers that help them add more value to their clients. Combining this best
practice knowledge based on thousands of pump stations with an engineering
firm's overall project management skills creates a powerful synergy.
Many industries already have adopted the prefabricated
model. Almost all of the water towers and tanks being installed today were
built and then shipped for on-site installation because of the considerable
savings in time and money. The golf industry adopted the concept of
prefabricated pumping systems long ago. Today, the practice is standard. As
technology has allowed size and cost barriers to be eliminated, it is only a
matter of time before incorporating prefabricated pump systems becomes standard
operating procedure for water works and municipalities worldwide as well.
Sizing Up the Possibilities