FCI FS10A Now SIL 2 Compliant
Source: 
Fluid Components International, LLC

Flow switch/monitor passes exida test

The Model FS10A analyzer flow switch/monitor from Fluid Components International (FCI) meets the requirements for Safety Integrity Level (SIL) 2 compliant service.

FCI’s SIL 2 compliance rating for the FS10A has been documented in a failure analysis report with FMEDA techniques by the accredited certification body exida. The FS10A has been classified as a Type B subsystem in accordance to IEC 61508-1 with a hardware failure tolerance of 0. The product’s average probability of failure on demand (PFD) and safe failure fraction (SFF) meets the requirements for SIL 2 compliance set forth in the standards.

The advanced Model FS10A analyzer flow switch/monitor represents a solution for continuously verifying flows within liquid or gas process analyzer sampling systems. It is a small, lightweight instrument featuring low-flow sensitivity, a relay alarm trip point, an analog output and an RS232 interface. The FS10A’s advanced electronics and thermal dispersion flow-sensing technology provide an accurate, repeatable solution for sampling system flow assurance.

In addition to SIL 2 compliance, agency approvals for the FS10A analyzer flow switch/monitor include FM, FMc, ATEX and IECEx for hazardous location installations.

Leave A Comment

  • Web page addresses and e-mail addresses turn into links automatically.
  • Allowed HTML tags: <a> <em> <strong> <cite> <code> <ul> <ol> <li> <dl> <dt> <dd>
  • Lines and paragraphs break automatically.

More information about formatting options

By submitting this form, you accept the Mollom privacy policy.