|
|
 |
|
|
Cavity Grinder Pump
The E810 progressing cavity grinder pump readily adapts to existing progressing cavity grinder pump systems. The system contains a quick-disconnect coupling for easy use. Its finned class 30 cast iron construction reduces heat. Other features include a corrosion-resistant powder coated epoxy finish, stainless steel hydraulic pump rotor, upper and lower ball bearing construction along with a carbon/ceramic mechanical seal.
|
| Email | Web | Company |
 |
 |
Zoeller Engineered Products |
|
Pump
Thompson pumps are being used in a new pump station design. Customers replace their traditional emergency backup systems, a
generator with an automatic transfer switch, with a diesel-driven dry prime pump. This independent unit is a less expensive solution to traditional pump station problems such as sewage pump failures. The versatile pump also supplements lift station pumps should routine maintenance or emergency repairs be necessary.
|
| Email | Web | Company |
|
|
Thompson Pump |
|
MBR Systems
Pall water treatment systems utilize hollow fiber membranes that are recognized as tough and robust. This same technology is incorporated into the Pall Aria MBR system, a state-of-the-art membrane bioreactor that transforms wastewater into high-quality effluent for reuse or discharge. The system features low air consumption, simple maintenance and a compact footprint.
|
| Email | Web | Company |
|
|
Pall Corporation |
|
Static Mixers
These channel static mixers provide high-efficiency, low-pressure drop mixing solutions for both open and closed channel applications. Mixing efficiencies up to 0.01 CoV can be achieved with a few inches of pressure drop. They are available in S.S. or FRP construction with integrated injection systems. Channel mixers can be supplied as complete assemblies or in components for onsite assembly where access is difficult.
|
| Email | Web | Company |
|
|
Komax Systems Inc |
|
Base Elbow Systems
This line of pull-out rail systems comes in sizes from 1.25 to 6 in. for most discharge pumps. The elbows eliminate the need to disconnect plumbing or physically enter the basin by allowing service personnel to lift the pump out of the basin along guide rails. Vertical, horizontal, bronze and check valve models are available as well as upper and intermediate guide rail brackets and other accessories.
|
| Email | Web | Company |
|
|
Conery Mfg Inc |
|
Fiberglass Products
Aickinstrut takes corrosion out of customers’ maintenance schedules with this lightweight quality line of fiberglass products consisting of maintenance-free fiberglass structural shapes, grating and pipe support systems. The company also provides fiberglass hardware, struts, pipe clamps, hangers and other accessories.
|
| Email | Web | Company |
|
|
Aickinstrut |
|
|
|
|
|
|
