|
|
 |
|
|
TUF-LOK International
The Tuf-Lok ring grip pipe couplings are low cost, heavy-duty self-aligning couplings for either high pressure, to 150 psig, or full vacuum rated applications. These couplings install quickly and easily, reducing installation costs. They are available in 1-inch (25mm) through 10-inch (250mm) pipe sizes and are made for use on plain end pipe, regardless of pipe wall.
|
| Email | Web | Company |
 |
 |
Tuf-Lok International |
|
Robert Wager Corp.
Wager Sewer Vent Valves are designed to prevent inflow of water during floods, while preventing outflow of sewage into the environment. Our model 2050 is a normally closed valve, designed to suppress sewer gas odors.
|
| Email | Web | Company |
|
|
Robert H. Wager Co Inc |
|
NordiPipe™
NordiPipe is a cured-in-place pipe rehabilitation technology that was developed to rehabilitate pressure pipelines including potable water, wastewater and industrial process sewers. The installation process requires no open-trench digging and pipe lengths of 700 feet or more can be rehabilitated in less than 24 hours. Pipes from 6” to 48” in diameter can be rehabilitated with a design life of 50 years.
|
| Email | Web | Company |
|
|
Norditube Technologies Inc, a CPT Company |
|
Neptune Research, Inc.
Neptune Research is the leader in manufacturing innovative solutions for all of your pipe repair and protection needs.
|
| Email | Web | Company |
|
|
Neptune Research, Inc. |
|
Metropolitan Industries, Inc
Metropolitan Industries is a single source supplier of pumps, control systems and ancillary equipment for the water and wastewater industry. They specialize in packaging pump systems such as housed booster pump stations, skid-mounted domestic water booster systems, lift stations, break tank systems and green water systems complete with U.L listed controls.
|
| Email | Web | Company |
|
|
Metropolitan Industries, Inc. |
|
Magnatrol Valve Corporation
NEW CATALOG - MAGNATROL SOLENOID VALVES 2-way bronze & stainless steel solenoid valves 1/4” - 3” to control flow of Water, Ammonias, Fuel Oil, Gas, Steam, Brine, Solvents, Cryogenics and Oxygen.
|
| Email | Web | Company |
|
|
Magnatrol Valve Corp. |
|
Hydromatic, Div of Pentair
The field-proven Hydromatic H4H Series yields the best of both worlds by providing greater efficiency and a steeper non-overloading performance while passing a full three inch spherical solid (as required by the “Ten States Standards” policy for submersible non-clog pumps) due to the enhanced geometry of the mono-vane impeller. The Hydromatic H4H Series features a smoother design, reducing the chance of possible plugging. The H4H Series yields steeper, non-overloading performance with flows up to 850 GPM and heads to 105' TDH. Available in 7.5HP through 15HP motors with speeds up to 1750RPM, the new H4H Series, encompasses a VFD (variable frequency drive) rated motor with Class H insulation. The F.M. approved, explosion-proof H4HX Series are rated Class I, Division1, Group C and/or D for hazardous locations.
|
| Email | Web | Company |
|
|
Hydromatic Pump |
|
HammerTek Corp.
The HammerTek Smart Elbow® for pneumatic and slurry conveying systems eliminates elbow wear, product degradation, plugging, clogging and many other common problems with conveying elbows. Free-trials and one-year warranties available.
|
| Email | Web | Company |
|
|
Hammertek Corp. |
|
Advanced Valve Technologies
EZ Valve obsoletes Linestopping
-Only One Excavation
-1 Hour or Less Installation
-All Ductile Iron Valve with Stainless Steel Fasteners
-Resilient Wedge Gate
-Rated 250 P.S.I.
-AWWA Spec C-509-01
-No Loss of Pipe Integrity
-Sizes 4” – 12”
-Over 10,000 Successful Installations
|
| Email | Web | Company |
|
|
Advanced Valve Technologies |
|
|
|
|
|
|
