FCI-Fluid Components International
FCI-Fluid Components International manufactures air/gas flowmeters, liquid/gas flow switches and flow conditioners. In both municipal and industrial WWT plants, FCI is the leading supplier in aeration and digester gas flow measurement applications, so you can install with total confidence and assurance that you are getting the right product, backed by FCI’s worldwide service and support.

Address

1755 La Costa Meadows Drive
San Marcos, CA 92078
United States
Toll-free: 800.854.1993
Phone: 760.744.6950
Fax: 760.736.6250

Products + Services

Wastewater treatment engineers who cannot find room for the recommended straight pipe run needed by electromagnetic flowmeters in sewage lift stations will find that the Vortab Elbow Flow Conditioner from The Vortab Company eliminates the problem by removing swirl and asymmetric velocity profiles caused by pumps being placed too close to the meter. more
  • Wastewater treatment engineers who cannot find room for the recommended straight pipe run needed by electromagnetic flowmeters in sewage lift stations will find that the Vortab Elbow Flow Conditioner from The Vortab Company eliminates the problem by removing swirl and asymmetric velocity profiles caused by pumps being placed too close to the meter. more
  • The FlexSwitch FLT pump protection flow switch improves process control by adding an extra margin of safety. The switch keeps pumps running longer and more reliably with less frequent maintenance over an expanded lifetime. It monitors the flow and temperature of liquids, gases, slurries, syrups, lubricants, coolants and more. more
  • The FCI FLT93S insertion-type FlexSwitch for flow and temperature monitoring is SIL 2 rated. It was designed for rugged environments, including wastewater treatment plants. FCI is the only thermal manufacturer providing temperature compensation of up to ±100○F to ensure set-point accuracy under variable process temperatures. The FLT93S is easily field-configurable or factory... more
  • Pump flow assurance is easy with FCI model FLT93 flow switches. For use with virtually any fluid, FLT93 includes standard features such as dual relay outputs, temperature compensation and rugged packaging that ensure their continuous accurate operation and long service life in wastewater treatment plant applications. more
  • The ST100 Series thermal mass air/gas flowmeter from Fluid Components International (FCI) has received ATEX and IECEx approvals, assuring FCI’s customers that the ST100 flowmeter has been designed and tested for safe operation in potentially hazardous environments. Its enclosure is ATEX and IECEx certified as flame-proof and protected from dust ignition. The ATEX and IECEx approvals are as... more
  • The new FLT93 Series FlexSwitch brochure provides a switch solution with complete product and application information. The FLT93 Series FlexSwitch is a heavy-duty thermal dispersion technology flow and level switch, and its multi-parameter measurement design provides a rugged long-life instrument. more
  • The ST100 Series flowmeter combines flow-sensing performance with feature- and function-rich electronics. As a “future-ready” thermal mass gas flowmeter, it features a plug-in card replacement that can be changed out by technicians in the field to adapt to a plant’s changing network communication needs. Featuring a unique graphical, multivariable, backlit LCD display, it brings new meaning to the... more
  • The ST100 Series flowmeter features a plug-in card replacement that can be changed out in the field to adapt to changing communication needs. A graphical, multivariable, backlit LCD continuously displays process measurements and alarm status. It measures gas mass flow rate, total flow, temperature and pressure. An optional, patent-pending SpectraCal Gas Equivalency calibration method lets users... more
  • The LS2000 level switch provides an economical solution for alarm and limit trip switch applications in process and plant installations. These thermal dispersion technology-based level switches have no moving parts to maintain or foul to ensure long service life and reduce routine maintenance costs. These insertion-type level switches provide a fast-response, highly repeatable trip point with a... more
  • Wastewater treatment plant engineers in search of an accurate, economical solution for air/gas flow measurement in aeration basins will find that the precision ST98 thermal mass flowmeter, when combined with the Vortab Model VIP flow conditioner, provides superior performance to minimize compressed air flow energy costs. more
  • With no moving parts, simple installation and rugged packaging, Fluid Components Intl. offers flowmeter solutions with low maintenance, low installed cost and long service life. For both municipal and industrial wastewater treatment plants, FCI supplies aeration and digester gas flow measurement applications. Pump flow assurance is easy with Model FLT93 flow switches, which are designed for use... more

Videos

Flowmeter Calibration
VeriCal In-Situ Calibration Demo


Accurate Gas Flow Measurement Improves Water Disinfection Process Efficiency

Many of today’s large urban water treatment plants rely upon sophisticated chlorination processes in order to provide clean, sanitary water to millions of consumers in... more

Protect Your Pump and Keep It Longer

In today’s complex and frequently rugged process plant environments, liquid pumps are often overworked and underprotected from adverse operating conditions. Many pumps... more

Air/Gas Mass Flowmeter Improves Wastewater Treatment Processing Efficiency

A fast-growing city in the arid desert regions of the Western U.S. recently addressed the need to expand its municipal service for new residents and subdivisions. In... more

Measuring Methane-Based Digester Gas Flow in Wastewater Treatment Plants

Process and plant engineers at municipal wastewater treatment facilities need to measure, monitor and dispose of methane (CH4) and other digester gases that occur... more

Innovative New Air/Gas Thermal Flowmeter Changes the Rules

Upgrading a plant’s gas flowmeters can improve process efficiency, reduce energy costs and save on maintenance expenses in both equipment and labor, as well as improve... more

FCI Offers Updated CD Catalog

Featuring best practices information, case studies and applications notes, the new FCI Flow/Level Measurement Product and Services Catalog CD Release 14.0 from Fluid... more

FCI Offers Best Practices Engineering Guide

Fluid Components International (FCI) has released the new “Best Practices Engineering Guide: Installation Recommendations for FCI Single-Point, Thermal Dispersion Flow... more

FCI Introduces ST98 Thermal Mass Flowmeter

Fluid Components International’s (FCI) ST98 thermal mass flowmeter, when combined with the Vortab Model VIP flow conditioner, helps to minimize compressed airflow energy... more

FCI Offers FlexSwitch FLT93 Pump Protection Flow Switch

The new FlexSwitch FLT93 pump protection flow switch from Fluid Components International (FCI) detects dry running conditions caused by irregular liquid flows or... more

FCI Exhibits Flowmeter at WEFTEC 2013

Process, plant and instrument engineers visiting WEFTEC 2013 Booth 3944 learned more about the advanced ST100 flowmeter and other solutions to flow metering,... more

Effective Aeration Basin Air Flow Monitoring

The aeration process requires large amounts of compressed air, and the energy cost of producing the compressed air is a big expense. The efficiency of the entire... more

Attention to Aeration

A fast-growing city in the arid desert of the western U.S. recently addressed the need to expand its municipal service for new residents and subdivisions. In recent... more

Protect Your Pump and Keep it Longer

Avoid pump failures with these care and prevention tips for liquid pumpsIn today’s complex and frequently rugged process plant environments, liquid pumps are often... more

Product Categories

Flow Metering; Flowmeters; Meters, Flow; Sensors, Flow; Instrumentation

Contact Form

You can send a message to this company using the contact form below.

Type the characters you see in this picture. (verify using audio)
Type the characters you see in the picture above; if you can't read them, submit the form and a new image will be generated. Not case sensitive.

POLL

Raleigh, N.C., has added a small increase to water bills as a permanent watershed protection fee. Do you agree with this idea?:
There is less than a month left to submit your nominations for Water & Wastes Digest’s Young... more
Recently, President Obama signed into law the Water Resources and Reform Development Act of 2014 (... more
Increasing water demand and decreasing supplies are key driving forces behind development of new... more
Proposed Clean Water Act clarifications raise questions
Wetlands, streams and the politics surrounding them are once again front page and center stage, as federal agencies and... more
Innovation & the business of water go hand in hand
Recent events remind me how water connects us, technology informs us, and innovation delivers us from stagnation.... more
Third-party certification for fracking to ensure compliance with performance standards
In the past two years, my Ferguson on the Frontline column has covered a number of topics, from rainwater collection to... more